PicoLog-1012 USB DAQ Kit

In stock
PicoLog-1012 USB DAQ Kit

PicoLog-1012 Low cost USB DAQ Kit

  • 12 input channels 
  • 10 bit resolution
  • 2 output channels
  • Use up to 20 data loggers at the same time
  • Max1 MS/s sample rate
  • USB connected and powered
  • Data acquisition software and SDK included
  • Terminal board

PicoLog-1012 Low cost USB DAQ Kit

Designed to meet the needs of a wide range of general-purpose voltage, sensor and transducer logging applications, the PicoLog 1000 Multichannel DAQ Series features independent software-configurable scaling and control outputs, an external terminal board for custom front-end circuitry and a choice of 10 or 12-bit input resolution.

A distinguished pedigree

The PicoLog 1000 Series is the result of a distinguished lineage that goes back to the release of our first multichannel data logger—the ADC-11—in 1993. The original ADC-11, and its successor the USB ADC-11, proved to be the perfect choice for users wanting a low-cost way to measure and record multiple signals. The PicoLog 1000 Series builds on this success to give you the same low-cost data acquisition but with greater power and performance. (Because the ADC-11 was so popular we’ve also added a USB ADC-11 compatibility mode which allows you to use your PicoLog 1000 logger as a direct replacement to the USB ADC-11.)

An expandable multichannel data acquisition system

The budget model PicoLog 1012 has 12 input channels and 10 bit resolution. The powerful PicoLog 1216 has 16 channels and 12 bit resolution. Need more channels? No problem. Using the new PicoLog 6 software you can connect up to 20 Pico data loggers to one PC—giving you a potential 320 channel PicoLog 1000 Series data acquisition system, or the ability to use your PicoLog 1000 logger with other devices such as the USB TC-08 Thermocouple Data Logger.

External Terminal Board

The external terminal board has screw terminals to allow sensor wires to be attached to the data logger without soldering. The terminal board also has locations where you can fit resistors to offset and extend the input ranges of the logger.

Fast and accurate

With 10 or 12-bit resolution and multiple sampling modes, a PicoLog 1000 Series logger will meet your data logging needs. The PicoLog 1000 Series has 3 sampling modes: Streaming mode allows channel voltage readings to be logged continuously at up to 100 kS/s, while block mode captures up to the full 1 MS/s  sample rate of the logger for a duration limited by the 8000 sample buffer, both these speeds applying to single-channel operation. 

PicoLog 6 data logging software for PicoLog 1000

PicoLog 6 is a complete data acquisition software package for the PicoLog 1000 voltage input data loggers. It provides a visual, easy-to-use interface allowing you to quickly set up simple or complex acquisitions and record, view and analyze data.

More Information

PicoLog 1000 Specifications

Model PicoLog 1012 PicoLog 1216
Analog inputs 12 16
Resolution 10 bits 12 bits
Accuracy 1% of full scale 0.5% of full scale
Maximum sampling rates:
PicoSDK (block mode)
PicoSDK (streaming)

1 MS/s[1]
1 kS/s[2]
1 MS/s[1]
100 kS/s[1]
Capture memory
PicoScope (and PicoSDK block mode)
Sample rates over 100 kS/s:
Lower sample rates:
PicoLog (and PicoSDK streaming mode):

8000 samples [1]
1 million samples [1]
Up to available PC storage
Analog bandwidth (-3 dB) DC to 70 kHz
Input type Single-ended
Write Your Own Review
You're reviewing:PicoLog-1012 USB DAQ Kit
Your Rating