This is demo store. No orders will be fulfilled.

Current Clamp TA018

In stock
SKU
current-clamp-ta018
S$210.00

20 A / 60 A DC (low amps) current clamp

The TA018 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps.

The current clamp has two calibration settings, set by a slider switch on the handle of the probe.

  1. 1 mV/10 mA (100 mV = 1 A)
    — use this for testing currents up to 20 A.
  2. 1 mV/100 mA (10 mV = 1 A)
    — use this for testing current up to 60 A.

In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required.

These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup. The Pico TA018 current clamp can either be purchased as an accessory within one of our popular diagnostic kits or individually under the packing code PP264.

More Information
Specifications

TA018 current probe characteristics
Input ranges (DC) Low (1 mV/10 mA): 10 mA to 20 A  
High (1 mV/100 mA): 100 mA to 60 A
Input ranges (AC RMS) Low (1 mV/10 mA): 10 mA to 20 A  
High (1 mV/100 mA): 100 mA to 60 A
AC frequency range Up to 20 kHz
Maximum conductor size 9 mm
Output connectors BNC
Operating environment 0 °C  to 50 °C, 70% RH
Dimensions 195 mm x 70 mm x 33 mm
Battery type 9 V DC NEDA 1604, 6F22, 006P
Battery life 100 hours typical with alkaline
Manufacturer Pico Technology
We found other products you might like!