TA043 100 MHz 700 V differential oscilloscope probe

In stock
SKU
TA043 100 MHz 700 V differential oscilloscope probe
S$895.00

TA043 100 MHz 700 V differential oscilloscope probe 10:1/100:1

The TA043 is an active differential probe suitable for high common-mode voltage measurement applications up to ±700 V (DC + peak AC). It can be used with signal speeds of up to 100 MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low-speed balanced differential signals found in serial communications buses.

More Information
Specifications

TA043 differential probe specifications

Bandwidth

DC to 100 MHz (–3 dB) 

Attenuation ratio 

10:1 / 100:1 

Accuracy

±2%

Input impedance

4 MΩ || 7 pF each side to ground 

Input voltage

Differential range (10:1)
Differential range (100:1) 

±70 V (DC + peak AC) or 70 V RMS
±700 V (DC + peak AC) or 500 V RMS

Common mode range

±700 V (DC + peak AC) or 500 V RMS
(10:1 and 100:1) 

Absolute max. voltage
(differential or common-mode)

1000 V RMS CAT III (10:1 and 100:1) 

Output voltage 

Swing

±7V into 50 kΩ load

Offset (typical) 

<±5 mV 

Noise (typical)

0.9 mV RMS

Source impedance (typical)

50 Ω

CMRR (typical) 

85 dB @ 50 Hz; 55 dB @ 1 MHz

Ambient operating Temperature

–10 to 40 ℃

Ambient storage temperature

–30 to 70 ℃

Power requirements

Standard

4xAA cells or 6 V DC / 200 mA mains adaptor
or regulated 9 V DC / 120 mA mains adaptor

Length of input leads 

30 cm

Length of BNC lead 

90 cm

Weight

500 g 

Dimension (LxWxH) 

202 mm x 83 mm x 38 mm 

Write Your Own Review
You're reviewing:TA043 100 MHz 700 V differential oscilloscope probe
Your Rating