This is demo store. No orders will be fulfilled.

TA095 Accelerometer

In stock
SKU
TA095 Accelerometer
S$490.00

TA095 Single-axis IEPE accelerometer

The TA095 is a single-axis IEPE accelerometer that is suitable for use in a wide range of applications.

Note: The TA095 can be used with any suitable device that provides a constant-current IEPE power source, such as the PicoScope 4224 IEPE.

The TA095 is contained within a kit with order code PP697, which contains a calibration certificate and an introductory guide included.

Mounting the accelerometer can be achieved either using the mounting stud fitted, or by using the optional TA096 mounting magnet available separately.

TA095 Single-axis IEPE accelerometer

The TA095 is a single-axis IEPE accelerometer that is suitable for use in a wide range of applications.

Note: The TA095 can be used with any suitable device that provides a constant-current IEPE power source, such as the PicoScope 4224 IEPE.

The TA095 is contained within a kit with order code PP697, which contains a calibration certificate and an introductory guide included.

Mounting the accelerometer can be achieved either using the mounting stud fitted, or by using the optional TA096 mounting magnet available separately.

More Information
Specifications
TA095 performance specifications
Sensitivity (±15%) 10.2 mV/(m/s²)
Measurement range ±490 m/s²
Frequency range 0.5 Hz to 10 kHz
Broadband resolution (1 Hz to 10 kHz) 3434 µm/s²
Nonlinearity ±1%
Transverse sensitivity ≤ 7%
TA095 electrical specifications
Settling time (within 1% of bias) ≤ 2.0 sec
Discharge time constant ≥ 0.3 sec
Excitation voltage 18 to 28 V DC
Constant Current Excitation 2 to 20 mA
Output impedance < 150 Ω
Output bias voltage Output bias voltage
Spectral noise (10 Hz) 78.5 (µm/s²)/√Hz
Spectral noise (100 Hz) 49.1 (µm/s²)/√Hz
Spectral noise (1 kHz) 39.2 (µm/s²)/√Hz
Electrical isolation (case) > 108 Ω
TA095 environmental specifications
Overload limit (shock) 49 050 m/s² pk
Temperature range –54 °C to + 121 °C
Enclosure rating IP68
TA095 physical specifications
Size (hex x height) 14 mm x 64 mm
Weight (with cable) 99.3 g
Mounting stud
Mounting thread 1/4-28 female
Mounting torque 2.7 to 6.8 Nm
Sensing element ceramic
Sensing geometry shear
Housing material stainless steel
Sealing molded
Electrical connector molded integral cable
Cable length 3 m
Weight Kg 0.0993
Manufacturer Pico Technology
TA095 Data Sheet
(Size: 225.2 KB)
TA095 User Guide
(Size: 975.5 KB)