CSE50216 RazorPlus Express |Neurotech

CSE50216 RazorPlus Express CompuScope, 2Ch, 500 MS/s, 16 bit, PCIe Gen3

The GaGe RazorPlus Express CSE25216 CompuScope is a dual-channel 16-bit digitizer supporting A/D sampling rates up to 500 MS/s with up to 300 MHz input bandwidth.

ADC data can be captured in dual channel or single channel modes with six software selectable input voltage ranges at ±100 mV, ±200 mV, ±500 mV, ±1 V, ±2 V, and ±5 V with software selectable 50 Ω or 1M Ω input impedance.

With eXpert PCIe Data Streaming Firmware, acquired data can be simultaneously streamed to host PC memory via the PCIe Gen3 x8 interface at sustained rates up to 2 GB/s (2-CHs * 500 MS/s per CH * 2 bytes per sample for 16-bit data) for real-time continuous signal recording operations.

Optionally stream acquired data from the RazorPlus Express to a high-performance Graphic Processing Unit (GPU) for signal processing and data recording in real-time! Gage CompuScope C SDK ready-made compiled sample programs illustrate PCIe data streaming to a GPU and effective exploitation of GPU parallelized vector processing to attain 10X ~ 100X faster analysis rates than the host CPU.

The RazorPlus Express can also be combined with wideband downconverters to be the heart of a wideband, multi-channel, RF/Microwave signal analysis and recording system that can cover signal frequencies up to 27 GHz with 160 MHz bandwidth.

More Information

Specifications

RazorPlus Express Series Specification

Model	CSE25216	CSE50216
Number of Ch	2	2
Max Sampling Rate Per Ch	250 MS/s	500 MS/s
ANALOG INPUT CHANNELS
A/D Resolution	16 bit
Bandwidth	150 MHz	300 MHz
Connectors	SMA
Impedance	50 Ω or 1M Ω
Coupling	AC or DC (software selectable)
	AC (1M Ω) = 10 Hz to 65 MHz
Voltage Ranges (software selectable)	±100 mV, ±200 mV, ±500 mV, ±1 V, ±2 V, ±5 V
On Board Memory	4 GS (8 GB)
Flatness	Within ±0.5 dB of Ideal Response to 125 MHz	Within ±0.5 dB of Ideal Response to 250 MHz
DC Accuracy	±1%
DC User Offset	Spans Full Scale Input Range (FSIR)
Absolute Max. Input	±10 V
TRIGGERING
Engines	2 per Channel,
	1 for External Trigger
Source	Any Input Channel,
	External Trigger or Software
Input Combination	All Combinations of Sources Logically OR’ed
Slope	Positive or Negative (software selectable)
Sensitivity	±2% of Full Scale Input Range of Trigger Source. Signal amplitude must be at least 4% of full scale to cause a trigger to occur. Smaller signals are rejected as noise.
Accuracy	Less than ±2% of Full Scale for Channel
	Triggering
Post-Trigger Data	32 points minimum. Can be defined with 32 point resolution.
EXTERNAL TRIGGER
Connector	SMA
Impedance	2k Ω
Coupling	AC or DC
Bandwidth	>100 MHz
Voltage Range	±1 V, ±5 V (software selectable)
TRIGGER OUT
Connector	SMA
Impedance	50 Ω
Amplitude	0 – 1.8 V
CLOCK IN
Connector	SMA
Signal Level	Minimum 1 V RMS, Maximum 2 V RMS
Impedance	50 Ω
Coupling	AC
Input Modes	External Clock or 10 MHz Reference Clock
External Clock Mode Rates	Minimum 125MHz, Maximum 250 MHz.	Minimum 250MHz, Maximum 500 MHz.
External Reference Clock Mode Rate	10 MHz ±1000 ppm; the external reference time base is used to synchronize the internal sampling clock
Variable/Inactive External Clock Mode	Supports variable rate k-clocking or inactive external clock, particularly useful for OCT applications.
CLOCK OUT
Connector	SMA
Signal Level	±750 mV
Impedance	50 Ω Compatible
Duty Cycle	50% ±10%
Output Modes	Maximum Sampling Clock Frequency or 10 MHz Reference Clock
Max. Frequency	500 MHz
Min. Frequency	250 MHz
MULTIPLE RECORD
Pre-Trigger Data	Up to 32 kS Total
Record Length	32 points minimum. Can be defined with
	32 point resolution.
TIME-STAMPING
Timing Resolution	One Sample Clock Cycle
Counter Turnover	>48 Hours Continuous
MULTI-CARD SYSTEMS
Master/Slave Mode	Provides synchronized triggering and
	sampling on all channels for all cards to
	create larger multi-channel systems.
Independent Mode	Each card operates independently within
	the system.
Number of Cards	2 to 8 Cards for up to 32 Channels Total
DIMENSIONS
Size	Single Slot PCIe, Full Height, 6.7 in (170.18 mm) Length
POWER CONSUMPTION
Power	25 Watts (typical)
PC SYSTEM REQUIREMENTS
PCI Express (PCIe) Slot	1 Free Full-Height Full-Length
	PCIe Gen1, Gen2 or Gen3, x8 or x16 Slot
Operating System	Windows 10/8/7 (32-bit/64-bit),
	Linux – Requires SDK for C/C#
Software Support
Software Development Kit	SDK C/C# Windows and Linux
	SDK MATLAB Windows
	SDK LabVIEW
	Linux – Requires SDK for C/C#
Application Software	GageScope Lite
	GageScope Standard
	GageScope Pro

Reviews

CSE50216 RazorPlus Express

CSE50216 RazorPlus Express CompuScope, 2Ch, 500 MS/s, 16 bit, PCIe Gen3

FEATURES

CSE50216 RazorPlus Express CompuScope, 2Ch, 500 MS/s, 16 bit, PCIe Gen3

RazorPlus Express Series Specification