Choosing the right active differential probe

In stock
Choosing the right active differential probe

TA223  TETRIS 2500 2.5 GHz high-impedance active oscilloscope probe 10:1

Pico Technology presents a unique Inline Probing System – the TETRIS® active probe. The unique design of the TETRIS 2500 active probe allows for contact to adjacent square pins with 2.54 mm pitch simultaneously. This is possible due to the probe's T-shaped housing, which allows many probes to be positioned next to each other and multiple measurements to be taken at the same time.

The TETRIS 2500 is independent of any particular system, and with its SMA connector and BNC adaptor, it can be plugged into any measuring instrument with a 50 Ω input. With an input resistance of 1 MΩ and an input capacitance of 0.9 pF the TETRIS 2500 probe is suitable for measurements in all frequency ranges. Unlike passive probes the TETRIS 2500 active probe offers a high input impedance into the GHz range. These characteristics make it the ideal probe for most of your daily measurements.

The TETRIS 2500 probe is shipped with a comprehensive set of accessories and durable soft pouch for safe storage.

More Information

TA223 TETRIS 2500 Active High Z probe specifications



Input impedance

1 MΩ || 0.9 pF

Input coupling of the measuring instrument

50 Ω

Probe bandwidth (–3 dB)

2.5 GHz

System bandwidth (–3 dB)

2 GHz (*)

Input dynamic range

±8 V

Max. input voltage

20 V

Cable length

1.3 m

Supply voltage

Power supply included



Operating: up to 2000 m
Storage: up to 15 000 m

Temperature range

Operating: 0° C to +45° C
Storage: –40° C to +71° C

Maximum relative humidity (operating)

80 % relative humidity for temperatures up to +31 °C, decreasing linearly to 40 % at +50 ° C

Write Your Own Review
You're reviewing:Choosing the right active differential probe
Your Rating