TA112 1 GHz high-impedance active oscilloscope

In stock
SKU
TA112 1 GHz high-impedance active oscilloscope
S$1,550.00

TA112  TETRIS 1000 1 GHz high-impedance active oscilloscope probe 10:1

Pico Technology presents a unique Inline Probing System – the TETRIS® active probe. The unique design of the TETRIS active probe allows for contact to adjacent square pins in 2.54 mm pitch simultaneously. This is possible due to the probe's T-shaped housing allowing many probes to be positioned next to each other, permitting multiple measurements to be taken at the same time.

The TETRIS 1000 is independent of any particular system, and with its standard BNC connector it can be plugged into any measuring instrument with a 50 Ω input. With an input resistance of 1 MΩ and an input capacitance of 0.9 pF the TETRIS 1000 probe is suitable for measurements in all frequency ranges. Compared to passive probes the TETRIS 1000 active probe offers a high input impedance into the GHz range. These characteristics make it the ideal probe for most of your daily measurements. If the measuring instrument does not have 50 Ω coupling, an external 50 Ω terminator can be used (such as a TA051), but the system bandwidth may be reduced.

The TETRIS 1000 probe is shipped with a comprehensive set of accessories and durable soft pouch for safe storage.

More Information
Specifications

TA112 TETRIS 1000 Active High Z probe specifications

Attenuation

10:1

Input impedance

1 MΩ || 0.9 pF

Input coupling of the measuring instrument

50 Ω

Probe bandwidth (–3 dB)

1 GHz

System bandwidth (–3 dB)

600 MHz (*)

Input dynamic range

±8 V

Max. input voltage

20 V

Cable length

1.3 m

Supply voltage

Power supply included

Environmental

Altitude

Operating: up to 2000 m
Storage: up to 15 000 m

Temperature range

Operating: 0° C to +45° C
Storage: –40° C to +71° C

Maximum relative humidity (operating)

80 % relative humidity for temperatures up to +31 °C

Write Your Own Review
You're reviewing:TA112 1 GHz high-impedance active oscilloscope
Your Rating